Calibrated Leaks Built into Test Parts
VTI can build a NIST-traceable Calibrated Leak directly into one of your parts to make a "test part" for a product that you are leak testing by helium, pressure decay or other methods. This test part is then periodically put through your regular production test cycle to calibrate the actual leak rate being detected.and to verify that the test system totally, from the inlet gas pressure to the final pass/fail signal, is performing valid tests.
As the builder of high-reliability Leak Testing Systems for manufacturing plants, VTI knows the importance of the 100% assurance of testing validity that can only be achieved by using these "Calibrated Test Parts". We have built these A2LA-accredited, custom leak standards into test parts of many different products such as those listed.
