Select Calibrator by Gas Type

[pl_raw][pl_accordion name=”GasSelection”][pl_accordioncontent name=”GasSelection” number=”1″ heading=”Select Helium Leaks” open=”yes”] [pl_tabs][pl_tabtitlesection type=”tabs”] [pl_tabtitle active=”yes” number=”1″]CL[/pl_tabtitle] [pl_tabtitle number=”2″]CLO[/pl_tabtitle] [pl_tabtitle number=”3″]CLOP[/pl_tabtitle] [pl_tabtitle number=”4″]CLOT[/pl_tabtitle] [pl_tabtitle number=”5″]CLP[/pl_tabtitle] [pl_tabtitle number=”6″]CLPT[/pl_tabtitle] [pl_tabtitle number=”7″]GPC[/pl_tabtitle] [pl_tabtitle number=”8″]GPP[/pl_tabtitle] [pl_tabtitle number=”9″]GPPT[/pl_tabtitle] [pl_tabtitle number=”10″]FSLC[/pl_tabtitle] [pl_tabtitle number=”11″]FSLT[/pl_tabtitle] [pl_tabtitle number=”12″]VSLC[/pl_tabtitle] [pl_tabtitle number=”13″]VSLT[/pl_tabtitle] [pl_tabtitle number=”14″]PSO[/pl_tabtitle] [/pl_tabtitlesection] [pl_tabcontentsection] [pl_tabcontent active=”yes” number=”1″] CL2

  • Good for leak rate ranges 10-3-10-7 atm-cc/sec
  • Can be used with any gas
  • Low Temperature coefficient of 0.2% per deg. C
  • Unbreakable: all stainless steel, all welded
  • Bakeable for UHV use: uses all metal fittings
[pl_button type=”primary” link=”” target=”blank”]Click For More[/pl_button] [/pl_tabcontent] [pl_tabcontent number=”2″] CLO-group-large

  • CAN BE CALIBRATED WITH ANY GAS – or mix.
  • UNBREAKABLE – all stainless steel, all welded.
  • WIDE LEAK-RATE CHOICE – use for large leak rate app’s.
  • SINGLE OR ADJUSTABLE LEAK RATES – can be calibrated at one or multiple pressures/rates..
  • STABLE – low temperature coefficient of 0.2% / °C.
  • CAN BE BUILT INTO A PRODUCTION TEST PART – to simulate a defect with a specific leak rate.
  • BAKEABLE FOR UHV USE – using all metal fittings.
  • MEETS ISO REQUIREMENTS – NIST-traceable, A2LA-accredited Calibration Certification.
[pl_button type=”primary” link=”” target=””]Click For More[/pl_button] [/pl_tabcontent] [pl_tabcontent number=”3″] CLO-group-large

  • CAN BE CALIBRATED WITH ANY GAS – or mix.
  • UNBREAKABLE – all stainless steel, all welded.
  • WIDE LEAK-RATE CHOICE – use for large leak rate app’s.
  • SINGLE OR ADJUSTABLE LEAK RATES – can be calibrated at one or multiple pressures/rates..
  • STABLE – low temperature coefficient of 0.2% / °C.
  • CAN BE BUILT INTO A PRODUCTION TEST PART – to simulate a defect with a specific leak rate.
  • BAKEABLE FOR UHV USE – using all metal fittings.
  • MEETS ISO REQUIREMENTS – NIST-traceable, A2LA-accredited Calibration Certification.
[pl_button type=”primary” link=”” target=””]Click For More[/pl_button] [/pl_tabcontent] [pl_tabcontent number=”4″] CLO-group-large

  • CAN BE CALIBRATED WITH ANY GAS – or mix.
  • UNBREAKABLE – all stainless steel, all welded.
  • WIDE LEAK-RATE CHOICE – use for large leak rate app’s.
  • SINGLE OR ADJUSTABLE LEAK RATES – can be calibrated at one or multiple pressures/rates..
  • STABLE – low temperature coefficient of 0.2% / °C.
  • CAN BE BUILT INTO A PRODUCTION TEST PART – to simulate a defect with a specific leak rate.
  • BAKEABLE FOR UHV USE – using all metal fittings.
  • MEETS ISO REQUIREMENTS – NIST-traceable, A2LA-accredited Calibration Certification.
[pl_button type=”primary” link=”” target=””]Click For More[/pl_button] [/pl_tabcontent][pl_tabcontent number=”5″] CLO-group-large

  • CAN BE CALIBRATED WITH ANY GAS – or mix.
  • UNBREAKABLE – all stainless steel, all welded.
  • WIDE LEAK-RATE CHOICE – use for large leak rate app’s.
  • SINGLE OR ADJUSTABLE LEAK RATES – can be calibrated at one or multiple pressures/rates..
  • STABLE – low temperature coefficient of 0.2% / °C.
  • CAN BE BUILT INTO A PRODUCTION TEST PART – to simulate a defect with a specific leak rate.
  • BAKEABLE FOR UHV USE – using all metal fittings.
  • MEETS ISO REQUIREMENTS – NIST-traceable, A2LA-accredited Calibration Certification.
[pl_button type=”primary” link=””target=””]Click For More[/pl_button] [/pl_tabcontent][pl_tabcontent number=”6″] CLO-group-large

  • CAN BE CALIBRATED WITH ANY GAS – or mix.
  • UNBREAKABLE – all stainless steel, all welded.
  • WIDE LEAK-RATE CHOICE – use for large leak rate app’s.
  • SINGLE OR ADJUSTABLE LEAK RATES – can be calibrated at one or multiple pressures/rates..
  • STABLE – low temperature coefficient of 0.2% / °C.
  • CAN BE BUILT INTO A PRODUCTION TEST PART – to simulate a defect with a specific leak rate.
  • BAKEABLE FOR UHV USE – using all metal fittings.
  • MEETS ISO REQUIREMENTS – NIST-traceable, A2LA-accredited Calibration Certification.
[pl_button type=”primary” link=”” target=””]Click For More[/pl_button] [/pl_tabcontent][pl_tabcontent number=”7″] GPCWeb

  • LOW TEMPERATURE COEFFICIENT – 0.2%/ °C.
  • WIDE LEAK-RATE CHOICE – 10-3 to 10-6 range.
  • LONG TERM STABILITY – Low depletion rate.
  • UNBREAKABLE – stainless steel leak element.
  • NEVER NEEDS REFILL – Lasts for years.
  • CLOGGING POSSIBLE – in unclean environments.
  • MEETS ISO REQUIREMENTS – NIST-traceable, A2LA-
    accredited Calibration Certification.
[pl_button type=”primary” link=”” target=””]Click For More[/pl_button] [/pl_tabcontent][pl_tabcontent number=”8″] GPPWeb (1)

  • WILL NOT CLOG – permeation leak element.
  • LONG TERM STABILITY – Low depletion rate.
  • WIDE LEAK-RATE CHOICE – 10-5 to 10-9 range.
  • NEVER NEEDS REFILL – Lasts for years.
  • SIMPLE TO OPERATE – minimal user training.
  • MEETS ISO REQUIREMENTS – NIST-traceable, A2LA-
    accredited Calibration Certification.
[pl_button type=”primary” link=”” target=””]Click For More[/pl_button] [/pl_tabcontent][pl_tabcontent number=”9″]

GPPT

  • WILL NOT CLOG – permeation leak element.
  • VIRTUALLY UNBREAKABLE – minimizes repairs.
  • LONG TERM STABILITY – Low depletion rate.
  • WIDE LEAK-RATE CHOICE – 10-4 to 10-9 range.
  • NEVER NEEDS REFILL – Lasts for years.
  • SIMPLE TO OPERATE – minimal user training.
  • MEETS ISO REQUIREMENTS – NIST-traceable, A2LA-
    accredited Calibration Certification.
[pl_button type=”primary” link=”” target=””]Click For More[/pl_button] [/pl_tabcontent][pl_tabcontent number=”10″] FSLC_Web

  • UNBREAKABLE – stainless steel capillary leak element.
  • FIXED LEAK RATE – for simple operation.
  • SPECIFY EXACT LEAK RATES – your test point.
  • WIDE LEAK-RATE CHOICE – the full range that is used for sniffing.
  • LOW TEMPERATURE COEFFICIENT – capillary element.
  • EASY PROBE LOCATION – for repeatable results.
  • SUITABLE FOR SF6 and OTHER GASES – call the factory.
  • MEETS ISO REQUIREMENTS – NIST-traceable, A2LA-
    accredited Calibration Certification.
[pl_button type=”primary” link=”” target=””]Click For More[/pl_button] [/pl_tabcontent][pl_tabcontent number=”11″]

FSLTLWeb

  • WILL NOT CLOG OR BREAK – permeation leak element.
  • FIXED LEAK RATE – for simple operation.
  • SPECIFY EXACT LEAK RATES – your test point.
  • WIDE LEAK-RATE CHOICE – the full range that is used for sniffing.
  • EASY PROBE LOCATION – for repeatable results.
  • SUITABLE FOR SF6 and OTHER GASES – call the factory.
  • MEETS ISO REQUIREMENTS – NIST-traceable, A2LA-
    accredited Calibration Certification.
[pl_button type=”primary” link=”” target=””]Click For More[/pl_button] [/pl_tabcontent][pl_tabcontent number=”12″] VSLC_Web

  • UNBREAKABLE – stainless steel capillary leak element.
  • LOW TEMPERATURE COEFFICIENT – capillary element.
  • ADJUSTABLE LEAK RATE – each has a 10:1 leak-rate range.
  • CAN BE SET TO AN EXACT LEAK RATE – without the usual manufacturing variance.
  • NO FALSE READINGS – no large dead spaces.
  • EASY PROBE POSITIONING – for repeatable results.
  • MEETS ISO REQUIREMENTS – NIST-traceable, A2LA-
    accredited Calibration Certification.
[pl_button type=”primary” link=”” target=””]Click For More[/pl_button] [/pl_tabcontent][pl_tabcontent number=”13″] VSLT_Web

  • WILL NOT CLOG OR BREAK – permeation leak element.
  • ADJUSTABLE LEAK RATE – by changing the pressure.
  • LONG TERM STABILITY – Low depletion rate.
  • CAN BE SET TO AN EXACT LEAK RATE – without the usual manufacturing variance.
  • REFILLABLE RESERVOIR – from the user’s gas supply.
  • WIDE LEAK-RATE CHOICE – the full range that is used for sniffing.
  • NO FALSE READINGS – no large dead spaces.
  • EASY PROBE LOCATION – for repeatable results.
  • MEETS ISO REQUIREMENTS – NIST-traceable, A2LA-
    accredited Calibration Certification.
[pl_button type=”primary” link=”” target=””]Click For More[/pl_button] [/pl_tabcontent][pl_tabcontent number=”14″] PSO1

  • ESSENTIALLY NO DEAD VOLUME – no pressure burst on opening.
  • LOW DEPLETION RATES – allows high flow rate applications and use with expensive gases.
  • FAST RESPONSE provides instant on-off operation.
  • CRIMPED METAL CAPILLARY LEAK ELEMENT – can use any gas.
  • AUTOMATIC OPERATION – for system integration.
  • LONG TERM STABILITY – valve is closed except during use.
  • MEETS ISO REQUIREMENTS – NIST-traceable, A2LA-
    accredited Calibration Certification.
[pl_button type=”primary” link=”” target=””]Click For More[/pl_button] [/pl_tabcontent] [/pl_tabcontentsection] [/pl_tabs] [/pl_accordioncontent][/pl_raw]